View MT170EN01_873637.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

inno l u x display corporation MT170EN01 v.1 lcd module specification ( ) preliminary specification ( ) final specification customer checked & approved by approved by checked by prepared by mkt qra pd mkt date: innolux display corporation, no.160 kesyue rd., chu-nan site, hsinchu science pa rk, chu- nan 350 , miao-li count y, taiw an tel: 886-37-586000 fax: 886-37-586060 document number: MT170EN01 v.1-d27
innolux copyright all rights reserved, copying forbidden. record of revision version revise date p a g e content 01 2005-03-09 f i r s t e d it i o n t o a l l 02 2005-05-18 15 add response time tr and tf value 22/23 revise module label and carton label
spec no. m t 1 7 0 e n 0 1 v. 1 page 3/26 all rights strictly reserved. any portion of this p rper shall not be reproduced, copied, or transformed to any other forms without permission f rom innolux display corporation. contents: a. general specification b. electrical specifications 1. pin assignment 2. absolute maximum ratings 3. electrical characteristics a. typical operating conditions b. display color v.s. input data signals c. input signal timing d. display position e. backlight driving conditions c. optical specifications d. reliability test items e. safety f. display quality g. handling precaution h. label i. packing form j. mechanical drawings appendix
spec no. m t 1 7 0 e n 0 1 v. 1 page 4/26 all rights strictly reserved. any portion of this p rper shall not be reproduced, copied, or transformed to any other forms without permission f rom innolux display corporation. a. general specification no. item specification remark 1 display resolution (pixel) 1280(h) x 1024(v), sxg a resolution 2 active area (mm) 337.9(h) x 270.3(v) 3 screen size (inch) 17 inches diagonal 4 pixel pitch (mm) 0.264(h) x 0.264(v) 5 color configuration r, g, b vertical stripe 6 overall dimension (mm) 358.5(w)x296.5(h)x17.5(d) max 7 weight (g) 2000 max 8 surface treatment anti-glare, haze = 25%, hard co ating (3h) 9 input color signal 8 bit lvds 10 color saturation 72% ntsc 11 display colors 16.2m colors (6 bit with frc) 12 optimum viewing direction 6 oclock 13 backlight 4 ccfl, top & bottom edge side
spec no. m t 1 7 0 e n 0 1 v. 1 page 5/26 all rights strictly reserved. any portion of this p rper shall not be reproduced, copied, or transformed to any other forms without permission f rom innolux display corporation. b. electrical specifications 1.pin assignment connector jae fi-x30ssl-hf or equivalent pin no symbol description 1 rxo0- lvds differential data input channel 0(-) 2 rxo0+ lvds differential data input channel 0(+) 3 rxo1- lvds differential data input channel 1(-) 4 rxo1+ lvds differential data input channel 1(+) 5 rxo2- lvds differential data input channel 2(-) 6 rxo2+ lvds differential data input channel 2(+) 7 gnd ground 8 rxoc- lvds differential clock input (-) 9 rxoc+ lvds differential clock input (+) 10 rxo3- lvds differential data input channel 3(-) 11 rxo3+ lvds differential data input channel 3(+) 12 rxe0- lvds differential data input channel 0(-) 13 rxe0+ lvds differential data input channel 0(+) 14 gnd ground 15 rxe1- lvds differential data input channel 1(-) 16 rxe1+ lvds differential data input channel 1(+) 17 gnd ground 18 rxe2- lvds differential data input channel 2(-) 19 rxe2+ lvds differential data input channel 2(+) 20 rxec- lvds differential clock input (-) 21 rxec+ lvds differential clock input (+) 22 rxe3- lvds differential data input channel 3(-) 23 rxe3+ lvds differential data input channel 3(+) 24 gnd ground 25 gnd ground 26 gnd ground or open 27 gnd ground 28 vcc power supply (+5.0v) 29 vcc power supply (+5.0v) 30 vcc power supply (+5.0v)
spec no. m t 1 7 0 e n 0 1 v. 1 page 6/26 all rights strictly reserved. any portion of this p rper shall not be reproduced, copied, or transformed to any other forms without permission f rom innolux display corporation. rear view of lcm
spec no. m t 1 7 0 e n 0 1 v. 1 page 7/26 all rights strictly reserved. any portion of this p rper shall not be reproduced, copied, or transformed to any other forms without permission f rom innolux display corporation. 2. absolute maximum rat ings values parameter symbol min. max. unit remark power voltage v dd - 0.3 7.0 v at 25 c input signal voltage v lh - 0.3 3.6 v at 25 c operating temperature top 0 50 c note 1 storage temperature t st - 2 5 60 c note 2 ccfl current icfl 4 8 [ma] rms re - screw 5 times assured torque at side mount 4 [kgf.cm] note 1: the relative humidity must not exceed 90% non-c ondensing at temperatures of 40c or less. at temperatures greater than 40c, the wet b ulb temperature must not exceed 39c. note 2: the unit should not be exposed to corrosive c hemicals. 0 10 20 30 40 50 60 70 80 90 100 -40 -20 0 20 40 60 80 relative humidity(%rh) temperature( c) operation range storage range
spec no. m t 1 7 0 e n 0 1 v. 1 page 8/26 all rights strictly reserved. any portion of this p rper shall not be reproduced, copied, or transformed to any other forms without permission f rom innolux display corporation. 3. electrical characteristics a. typical operating conditions item symbol min. typ. max. unit remark input voltage v dd 4.5 5.0 5.5 v permissive power input ripple v rf 0.1 - - v note 1 input current i dd - 0.55 0.75 a note 2 differential impedance z m 90 100 110 ohm power consumption p c - 2.75 3.75 watts note 2 rush current i rush - 2.0 3.0 a note 3 common mode voltage vcm 1.125 1.25 1.375 v differential input voltage vid 250 350 450 mv threshold voltage (high) vth - - 100 mv note 4 logic input voltage lvds: in+, in- threshold voltage (low) vtl -100 mv note 4 note 1: power input ripple should not exceed min. val ue. note 2: the specified current and power consumption a re under the v cc =5v, 25 c, fv=60hz (frame frequency) condition whereas mosaic pattern (bl ack & white [8*6] ) is displayed. white : 255 gray black : 0gray mosaic pattern (black & white [8*6] )
spec no. m t 1 7 0 e n 0 1 v. 1 page 9/26 all rights strictly reserved. any portion of this p rper shall not be reproduced, copied, or transformed to any other forms without permission f rom innolux display corporation. note 3 : test condition :` (1) v dd = 5 v, v dd rising time = 470 us 10% (2) pattern: mosaic pattern (3) test circuit note 4 : lvds signal definition vid = vin + C vin- , vcm = vcm + Cvcm- , vid = vid + Cvid- , vid+ = vih + Cvih- , vid- = vil + Cvil- , vcm = (vin + +vin-)/2, vcm+ = (vih + +vih-)/2, vcm- = (vil + +vil-)/2, 90 % ton=470 s 10% v dd 5 v 12v v dd ( lcd input) control signal (high to low) m2 2sk1399 m1 2sk1059 r2 1k c2 10000pf c3 1uf r3 47k r1 47k fuse c1 1uf vin + = positive differential data & clk input vin- = negative differential data & clk input
spec no. m t 1 7 0 e n 0 1 v. 1 page 10/26 all rights strictly reserved. any portion of this p rper shall not be reproduced, copied, or transformed to any other forms without permission f rom innolux display corporation. note 5 : power on sequence for lcd v dd parameter value unit min typ max ms t1 0.1 -- 10 ms t2 0 -- 10 ms t3 200 250 -- ms t4 100 250 -- ms t5 0 20 50 ms t6 0.1 -- 10 ms t7 1000 -- -- ms
spec no. m t 1 7 0 e n 0 1 v. 1 page 11/26 all rights strictly reserved. any portion of this p rper shall not be reproduced, copied, or transformed to any other forms without permission f rom innolux display corporation. b. display color v.s. input data signals the brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for the color; the higher the binary input, th e brighter the color. the table below provides a reference for color versus data input. color input color data red green blue msb lsb msb lsb msb lsb r7 r6 r5 r4 r3 r2 r1 r0 01 0 0 0 1 1 1 black red(255) green(255) blue(255) cyan magenta yellow white 01 0 0 0 1 1 1 01 0 0 0 1 1 1 01 0 0 0 1 1 1 01 0 0 0 1 1 1 01 0 0 0 1 1 1 basic colors 00 0 : 11 1 red(000) dark red(001) red(002) : red(253) red(254) red(255) bright 00 0 : 11 1 00 0 : 11 1 00 0 : 11 1 00 0 : 11 1 00 0 : 11 1 red 00 0 : 00 0 green(000)dark green(001) green(002) : green(253) green(254) green(255) bright 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 green 00 0 : 00 0 blue(000) dark blue(001) blue(002) : blue(253) blue(254) blue(255) bright 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 blue 01 0 0 0 1 1 1 0 0 1 : 01 1 0 0 0 : 00 0 0 0 0 : 00 0 01 0 0 0 1 1 1 0 1 0 : 10 1 0 0 0 : 00 0 0 0 0 : 00 0 g7 g6 g5 g4 g3 g2 g1 g0 00 1 0 1 0 1 1 00 1 0 1 0 1 1 00 1 0 1 0 1 1 00 1 0 1 0 1 1 00 1 0 1 0 1 1 00 1 0 1 0 1 1 00 1 0 1 0 1 1 00 1 0 1 0 1 1 00 0 : 11 1 00 0 : 11 1 00 0 : 11 1 00 0 : 11 1 00 0 : 11 1 00 0 : 11 1 00 1 : 01 1 01 0 : 10 1 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 b7 b6 b5 b4 b3 b2 b1 b0 00 0 1 1 1 0 1 00 0 1 1 1 0 1 00 0 1 1 1 0 1 00 0 1 1 1 0 1 00 0 1 1 1 0 1 00 0 1 1 1 0 1 00 0 1 1 1 0 1 00 0 1 1 1 0 1 00 0 : 11 1 00 0 : 11 1 00 0 : 11 1 00 0 : 11 1 00 0 : 11 1 00 0 : 11 1 00 1 : 01 1 01 0 : 10 1 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0 00 0 : 00 0
spec no. m t 1 7 0 e n 0 1 v. 1 page 12/26 all rights strictly reserved. any portion of this p rper shall not be reproduced, copied, or transformed to any other forms without permission f rom innolux display corporation. c. input signal timing support input timing table item description min. typ. max. unit period 14.71 18.52 22.22 ns clock dclk frequency 45 54 68 mhz t v_total v total line number 1044 1066 1300 t h_total t v_data data duration 1024 t h_total t vb v-blank 20 42 t h_total vertical f v frequency 50 60 75 hz t h_total h total pixel number 710 844 980 dclk t h_data data duration 640 dclk horizontal t hb h-blank 70 204 dclk note : de is reference signal, de means the display data valid. vertical signal horizontal signal
spec no. m t 1 7 0 e n 0 1 v. 1 page 13/26 all rights strictly reserved. any portion of this p rper shall not be reproduced, copied, or transformed to any other forms without permission f rom innolux display corporation. d. display position d(1, 1) d(2, 1) d(640, 1) d(1279, 1) d(1280, 1) d(1, 2) d(2, 2) d(640, 2) d(1279, 2) d(1280, 2) . . . . . . . . . . . . d(1, 512) d(2, 512) d(640, 512) d(1279, 512) d(1280, 512) . . . . . . . . . . . . d(1, 1023) d(2, 1023) d(640, 1023) d(1279, 1023) d(1280, 1023) d(1, 1024) d(2, 1024) d(640, 1024) d(1279, 1024) d(1280, 1024) e. backlight driving conditions parameter symbol min. typ. max. unit remark remark lamp voltage vl 610 700 vrms lamp operation current il 4 7 8 marms note 1 power consumption pl 17.08 22.4 w 1500 t = 25 c note 2,3,4,5 lamp starting voltage vlstart 1750 vrms t = 0 c note 2,3,4,5 frequency f 40 50 80 khz note 5 40000 hr note 6 lamp life time 50000 hr note 7 note 1 : the degrees of unbalance: less than 10% the ratio of wave height: less than 2 10% the degrees of umbalance = |ip-i-p| /irms*100(%) the ratio of wave height = ip(or i-p)/irms lamp should be completely turned on. note 2: test equipment: as-114b, output capacitor =18pf, f= 57khz note 3: the voltage shown above should be applied to the lam p for more than 1 second after startup. otherwise, the lamp may not be turned on norm ally. ip i-p ip: high side i-p: low side
spec no. m t 1 7 0 e n 0 1 v. 1 page 14/26 all rights strictly reserved. any portion of this p rper shall not be reproduced, copied, or transformed to any other forms without permission f rom innolux display corporation. note 4: inverter should provide more than min. value, and then lamp could be completely turned on note 5: lamp frequency may produce interference with horizontal synchronous frequency and this may cause line flow on the display. therefore lamp fr equency shall be detached from the horizontal synchronous frequency and its harmonics as far as possible in order to avoid interference. note 6: lamp life definition : (a) lamp current il = (7) ma (b) the brightness of lamp becomes 50% of the initial brightness or not normal lighting. note 7: lamp life definition : (a) lamp current il = (4) ma (b) the brightness of lamp becomes 50% of the initial brightness or not normal lighting. backlight connecter : jst bhsr - 02vs-1 pin no. symbol function remark 1 vih lamp high voltage input cable color: pink 2 vil lamp low voltage input cable color: white
spec no. m t 1 7 0 e n 0 1 v. 1 page 15/26 all rights strictly reserved. any portion of this p rper shall not be reproduced, copied, or transformed to any other forms without permission f rom innolux display corporation. c. optical specifications specification item symbol condition min. typ. max. unit remark tr 3 5 tf 9 11 response time tr+tf = 0 12 16 ms note 4 contrast ratio cr = 0 400 500 note 3,5 top cr R10 cr R5 60 70 70 80 bottom cr R10 cr R5 50 70 60 80 left cr R10 cr R5 60 70 70 80 viewing angle right cr R10 cr R5 60 70 70 80 deg note 3,5,7 brightness ( center ) y l 250 300 n it note 3,6 wx 0.313 wy 0.329 rx 0.640 ry 0.349 gx 0.284 gy 0.617 bx 0.142 color chromaticity(cie) by = 0 -0.03 0.067 +0.03 note 3 white uniformity (13 ) w 0.75 0.8 note 3,8 cross talk ct 2% note 9 tco 03 a.2.3.4 (luminance uniformity) w 2 1.7 note 10 t co 03 a.2.4.2 (luminance contrast) cr 2 0.8 note 11 note 1: ambient temperature = 25c. note 2: to be measured in dark room after backlight warm up 30 minutes. note 3: to be measured with a viewing cone of 2by to pcon luminance meter bm-5a. note 4: definition of response time: the output signals of bm-7 are measured when the inp ut signals are changed from black to white (falling time) and from white to black ( rising time), respectively. the response time
spec no. m t 1 7 0 e n 0 1 v. 1 page 16/26 all rights strictly reserved. any portion of this p rper shall not be reproduced, copied, or transformed to any other forms without permission f rom innolux display corporation. interval between the 10% and 90% of amplitudes. refe r to figure as below. note 5. definition of contrast ratio: contrast ratio is calculated with the following formu la. note 6: driving conditions for ccfl: i l = 7.0 ma, 50 khz frequency. note 7: definition of viewing angle note 8: definition white uniformity: luminance are measured at the following thirteen po ints (1~13). s i g n a l ( r e l a t i v e v a l u e ) "black" tr tf "white" "white" 0% 10% 90% 100% contrast ratio (cr)= brightness on the "white" state brightness on the "black" state w = minimum brightness of thirteen points maximum brightness of thirteen points
spec no. m t 1 7 0 e n 0 1 v. 1 page 17/26 all rights strictly reserved. any portion of this p rper shall not be reproduced, copied, or transformed to any other forms without permission f rom innolux display corporation. note 9: unit: percentage of dimension of display area l l a -l a l / l a x 100%= 2% max., l a and l a are brightness at location a and a l l b -l b l / l b x 100%= 2% max., l b and l b are brightness at location b and b note 10: tco03 a.2.3.4: luminance uniformity - angular depen dence. 1. refer to fig.1&2, for fpds in the horizonta l direction, the mean value of the lmax. to lmin. ratios at 30 degrees shell be 1.7. formula: 7.1 2 . min 30 . max 30 . min 30 . max 30 ?? ? ?? ? ? ? + ?? ? ?? ? + + l l l l 2. refer to fig.1&3, for fpds in the vertical d irection, the value of lmax. to lmin. ratio at +15 degree shell be 1.7 and the largest value of lmax. t o lmin. ratio at 15 degree shell be formula: 7.1 . min 15 . max 15 + + l l formula: 7.1 . min 15 . max 15 , . min 15 . max 15 . ?? ? ?? ? ? ? + + l l l l max 1/4 l 1/4 l 1/4 w 1/4 w 1/2 w 1 2 3 4 5 6 7 8 9 10 11 12 13 1/10 w 1/10 w 1/10 l w 1/2 l l 1/10 l 0 gray level 1/2 1/6 a b 1/2 1/2 1/6 1/6 2/3 1/3 1/3 2/3 a b 128 gray level 128 gray level
spec no. m t 1 7 0 e n 0 1 v. 1 page 18/26 all rights strictly reserved. any portion of this p rper shall not be reproduced, copied, or transformed to any other forms without permission f rom innolux display corporation. note 11: tco03 a.2.4.2: luminance contrast C angular dependen ce. refer to fig.1&2, center point(pc) luminance of white(lw) and black(l b ) is measured at 30 degrees. the luminance contrast values c +30 ,c -30 ,shell be calculated using the formula: lb lw lb lw c + ? = for fpds, min. (c +30 ,c -30 ) shell be 0.8 and reported as luminance contrast. figure1: measurement positions for angular dependence l uminance uniformity. figure2: top view of test set-up when the screen is rot ated 30 degrees. the +rotation is defined clockwise.
spec no. m t 1 7 0 e n 0 1 v. 1 page 19/26 all rights strictly reserved. any portion of this p rper shall not be reproduced, copied, or transformed to any other forms without permission f rom innolux display corporation. figure3: side view of the test set-up when the screen is tilted 15 degrees backwards.
spec no. m t 1 7 0 e n 0 1 v. 1 page 20/26 all rights strictly reserved. any portion of this p rper shall not be reproduced, copied, or transformed to any other forms without permission f rom innolux display corporation. d. reliability test items test item test condition judgement remark high temperature storage 60c, 40%rh ,240hrs note 1 note 2 low temperature storage -25c, 240hrs note 1 note 2 high temperature & high humidity operation 40c, 90%rh,240hrs (no condensation) note 1 note 2 high temperature operation 50c, 40%rh, 240hrs note 1 note 2 low temperature operation 0c, 240hrs note 1 note 2 thermal shock (non-operation) -20c~60c 1hr, 10mins, 1hr, 100cycles note 1 note 2 electrostatic discharge (esd) (non - operation) 150 pf,330?,10kv,1 second, 9 position on the panel, 10 times each place note 1 note 2 vibration (sine wave) (non-operation) sweep:1g, 10h z ~ 500h z ~ 10h z /30min 1 hr for each direction x, y, z (3 hrs in total) note 1 note 2 vibration (random) (package) (non-operation) 0.015g2/hz from 5~200hz -6db/octave from 200~500hz 1 hr for each direction x,y,z (3 hrs in total) note 1 note 2 drop (package) 50cm/1corner,3edges,6sides note 1 note 2 mechanical shock (non-operation) 200g/2ms, x, y, z once for each direction note 1 note 2 note 1 : pass: normal display image with no obvious non-uniformity and no line defect. partial transformation of the module parts should b e ignored. fail: no display image, obvious non-unifor mity, or line defects. note 2 : evaluation should be tested after storage at ro om temperature for one hour.
spec no. m t 1 7 0 e n 0 1 v. 1 page 21/26 all rights strictly reserved. any portion of this p rper shall not be reproduced, copied, or transformed to any other forms without permission f rom innolux display corporation. e. safety (1) sharp edge requirements there will be no sharp edges or corners on the disp lay assembly that could cause injury. (2) materials a. toxicity there will be no carcinogenic materials used anywhe re in the display module. if toxic materials are used, they will be reviewed and approved by the res ponsible innolux toxicologist. b. flammability all components including electrical components that do not meet the flammability grade ul94-v1 in the module will complete the flammability rating ex ception approval process. the printed circuit board will be made from material rated 94-v1 or bet ter. the actual ul flammability rating will be printed on the printed circuit board. c. capacitors if any polarized capacitors are used in the display assembly, provisions will be made to keep them from being inserted backwards. f. display quality the display quality of the color tft-lcd module sho uld be in compliance with the innoluxs incoming inspection standard. g. handling precaution the handling of the tft-lcd should be in compliance with the innoluxs handling principle standard.
spec no. m t 1 7 0 e n 0 1 v. 1 page 22/26 all rights strictly reserved. any portion of this p rper shall not be reproduced, copied, or transformed to any other forms without permission f rom innolux display corporation. h. label (1) module label (a) model number : MT170EN01 (b) version : v.1 (c) serial id i : z 1 z 2 z 3 z 4 z 5 z 6 z 7 z 8 z 9 z 10 z 11 z 12 serial id includes the information as below : 1. manufactured date: year: 0~9, for 2000~2009 2. month: 1~9 & a~c for jan.~dec. 3. date: 1~9 & a~z (exclude i, o, q, u) for 1th~31t h 4. code of grade: 1, 3, 5, 7, e 5. serial no: module manufacture sequential no (e) serial id ii (inl internal use) MT170EN01 am1700005 v.1 1xx made in xxx z 1 z 2 z 3 z 4 z 5 z 6 --z 7 -- z 8 z 9 z 10 z 11 z 12 28 mm serial no code of grade year, month, date inl internal use i nnolux display inl internal use z 1 'z 2 '-z 3 ' z 4 'z 5 'z 6 'z 7 '-z 8 ' - z 9 '- z 10 '- z 11 ' z 12 '-z 13 '-z 14 ' z 15 ' -z 16 '-z 17 'z 18 ' z 19 ' -z 20 'z 21 'z 22 ' z 23 ' inl internal use 83 mm
spec no. m t 1 7 0 e n 0 1 v. 1 page 23/26 all rights strictly reserved. any portion of this p rper shall not be reproduced, copied, or transformed to any other forms without permission f rom innolux display corporation. (2) carton label 120 mm (a) model number : MT170EN01 (b) version : v.1 (c) packing quantity : 10 pcs (d) serial id : z 1 z 2 z 3 z 4 z 5 z 6 z 7 z 8 z 9 serial id includes the information as below : (a) manufactured date: year: 0~9, for 2000~2009 month: 1~9 & a~c for jan.~dec. date: 1~9 & a~z (exclude i, o, q, u) for 1th~ 31th (b) code of grade: 1, 3, 5, 7, e (c) serial no: module packing sequential no innolux display box id : z 1 z 2 z 3 z 4 -- z 5 -- z 6 z 7 z 8 z 9 model no. MT170EN01 v.1 am1700005 1xx quantity : 10 pcs mfg date: 20xx/xx/xx made in xxx 100 mm serial no code of grade year, month, date inl internal use
spec no. m t 1 7 0 e n 0 1 v. 1 page 24/26 all rights strictly reserved. any portion of this p rper shall not be reproduced, copied, or transformed to any other forms without permission f rom innolux display corporation. i. packing form
spec no. m t 1 7 0 e n 0 1 v. 1 page 25/26 all rights strictly reserved. any portion of this p rper shall not be reproduced, copied, or transforme d to any other forms without permission from innolux display corporation. j. me drawing (1) front view
spec no. : page : 23/23 all rights strictly reserved. any portion of this p rper shall not be reproduced, copied, or transforme d to any other forms without permission from innolux display corporation. (2) back view
bdtic ???? http://www.bdtic.com/innolux ????bdtic ??

▲Up To Search▲

Price & Availability of MT170EN01

	To Download MT170EN01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .